Normative references:

1. EN 50483-1 Test requirements for low voltage serial bundied cable accessories.
Part 1: Generalities.

2. EN 50483-2 Test requirements for low voltage serial bundled cable accessories.
Part 2: Tension and suspension clamps for self supporting system.

3. EN 50483-3 Test requirements for low voltage aerial bundled cable accessories.
Part 3: Tension and suspension clamps for neutral messenger system.

4. EN 50483-4 Test requirements for low voltage serial bundled cable accessories.
Part 4: Connectors.

5. EN 50483-5 Test requirements for low voltage serial bundled cable accessories.
Part 5: Electrical ageing test.

6. EN 50483-6 Test requirements for low voltage serial bundled cable accessories.
Part 6: Environmental testing.

7. IEC 61238-1-1:2018 Compression and mechanical connectors for power cables.
Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um=1,2 kV) tested on non-insulated conductors.

8. IEC 61238-1-2:2018 Compression and mechanical connectors for power cables.
Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um=1,2 kV) tested on insulated conductors.

9. IEC 61238-1-3:2018 Compression and mechanical connectors for power cables.
Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um=1,2 kV) up to 30 kV (Um=36 kV) tested on non-insulated conductors.

10. EN 61284:1997 Overhead lines-Requirements and tests for fittings.

11. IEC 60068-2-5:2018 Environmental testing.
Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering.

12. IEC 60068-2-11:2021 Environmental testing.
Part 2-11: Tests - Test Ka: Salt mist.

13. EN 50397-2:2009 Covered conductors for overhead lines and the related accessories for rated voktages above 1kV AC and not exceeding 36 kV AC.
Part 2: Accessories for covered conductors. Tests and acceptance criteria.

14. IEC 60695-11-2:2017 Fire hazard testing.
Part 11-2: Test flames - 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance.

15. IEC 62561-1:2017 Lightning protection system components (LPSC).
Part 1: Requirements for connection components.

16. IEC 62561-2:2018 Lightning protection system components (LPSC).
Part 2: Requirements for conductors and earth electrodes.

17. ДСТУ 4743:2007 Проводи самоутримні ізольовані та захищені для повітряних ліній електропередавання  Загальні технічні умови.